Ophir’s 2023 Laser Measurement Catalog is Here!
The new updated edition of our laser measurement catalog is ready!As in every year – it sets out the comprehensive range of laser power and energy sensors, meters and laser beam profiling systems for medical, industrial, defense, research applications and more. It is an easy and agile round-up with short descriptions and up-to-date technical specifications.…
continue reading
High-Power Lasers and Industry 4.0: Focusing on Knowledge
A new measurement procedure allows for the fast and contact-free measurement of the focused laser beam. At the same time, modern measuring devices have Profinet interfaces and allow the processes to be documented. These are enormous advantages, especially in times of just-in-time production. The challenge – everything has to fit perfectly Automated laser welding is…
continue reading
Juno-RS :A New Virtual Laser Power Meter
Typical laser power or energy measurement requires a dedicated sensor to handle the laser power/energy and convert it into an electrical signal, a processing unit to analyze and log the measurements taken, and some sort of display to present the measurement results. Measurements and integration with automation systems In many industrial applications, there is a…
continue reading
Even With Volkswagen AG: Ophir’s BeamWatch System Optimizes Laser Process Development
The laser seam welding of sheets of zinc-coated steel – a combination of metals with disparate melting and evaporation properties – used to be a major challenge for the automotive industry. But Volkswagen AG is pursuing a promising approach with multi-focal laser welding: A newly developed process enables significantly higher welding speeds than is otherwise…
continue reading
On-demand Webinar: High Power laser measurement challenges and solutions
Monitoring laser behavior in high-power applications is critical to keeping your process running properly. However, that monitoring – the laser measurement itself – is not trivial. There are many “little things” one could do that might unknowingly mess with the measurement, or even damage the instrument. For example: • At what point should the cooling…
continue reading
Exact Cuts With a Laser: Recognizing and Compensating for Thermal Focus Shift
Read all about how Messer Cutting Systems uses Ophir BeamWatch for non-contact measurement of the laser beam! Precise cuts, sophisticated component geometries, limited material melt – the advantages of laser cutting are numerous. And due to the steady increases in laser power, these advantages can now benefit a range of new applications: fusion cutting is…
continue reading
Ariel All-in-One High Power Sensor is the Best Solution Available for Measuring Laser in Industrial Applications – Here’s Why
In industrial applications such as additive manufacturing, welding, and cutting, you of course want to keep yields and efficiency high – and keep scrap to a minimum. That means the process needs to be carefully monitored, and the measurements will need to be accurate and fast. Saves you valuable production time (and money) comparing to…
continue reading
Ophir New BeamPeek™: High Power Laser Beam Analysis and Power Measurement System for Additive Manufacturing
Our revolutionary BeamPeek At laser Munich 2022, we finally revealed our brand new BeamPeek – combined beam analysis & power measurement system specially designed for additive manufacturing chambers. As 3D SLM (Selective Laser Melting) and AM (Additive Manufacturing) systems have gained in popularity for the mass production of metallic parts, the components produced are becoming larger in…
continue reading
Things to Remember When Setting Up Laser Measurement Equipment for the First Time
Recently, I had the opportunity to perform a product demonstration for a prospect. I’d been in field sales for Ophir for about seven and a half years from 2009 to 2016, but with the pandemic limiting customer visits over the past several years combined with a recent role change, it had been a while since…
continue reading
Quality Assurance in Additive Production
The Fraunhofer Research Institution for Additive Manufacturing Technologies (IAPT) has set a goal for itself to automate additive production and use this technology to manufacture the products of tomorrow in a resource efficient manner. The Goal: Deliver the Same Repeatable Results A consistently high level of quality in the manufactured components is decisive for whether…
continue reading
Ophir’s 2022 Laser Measurement Catalog is Here!
As every year – Ophir’s new 2022 catalog for laser measurement covers a wide range of laser power and energy sensors, meters and laser beam profiling systems for medical, industrial, defense, and research applications. The first section of the catalog is devoted to laser power meters, which consist of sensors (detectors) and meters (displays). Ophir online tools…
continue readingWatch: Product Overview – “Helios Plus” Industrial Laser Power Meter Family
For measuring high power lasers in industrial settings, meet Ophir’s Helios Plus family. Designed with factory automation in mind, they have a robust, industrial design for harsh environments, and the range of communication interfaces make them easy to integrate into factory networks. Get a brief introduction to the new Helios Plus family in the following…
continue reading