Lasers are famous for their focusability. (As in: “laser-focus.”)
That’s why many laser power sensors have 30, 20, or even just 10 mm apertures. This is usually more than enough space for a laser beam.
But what about large lasers like diode stacks or non-laser light sources? How can a small sensor measure a large laser beam?
I’ve mentioned BeamWatch before.
It’s an innovative technique for profiling high power lasers (1 kW and up).
I’ve even touched on the underlying Rayleigh scattering effect that makes this possible.
But how does this really work?
With all the advancements in laser technology, lasers have become higher quality and more consistent.
Laser manufacturers test and measure their lasers during development, to make sure you, the laser end user, get the highest quality laser system.
With all this in mind then, do you really have to measure your laser system?
Modern production facilities must constantly increase throughput, at less cost, with less scrap, and with minimum downtime. In this video overview, you will learn how application of new, advanced technology in measurement devices, can help both designers and users of industrial laser systems to optimize and control their processes, so they can accomplish these goals and achieve consistently good results – both in quality and quantity.
Measuring the focal spot of a high power laser is challenging, at best.
The main issue is that when a high power laser is focused down to a small point, the power density can be extremely high, typically high enough to damage any sort of measurement equipment you would use.
Going to Munich for LASER World of PHOTONICS 2015?
We’ll be showing several new products in Munich, not to mention quite a few of our classics.
You’re going to be busy. You can’t (and shouldn’t) go to every booth. So I’m going to very clear. Our booth is not for everyone. However,
With high power lasers, there’s always a safety concern for equipment and people nearby.
(Of course, I’m not qualified to give a detailed analysis of what needs to be taken into account for laser safety. For that, you should consult a laser safety officer.)
I want to specifically ask whether there’s an issue of laser light reflecting off power measuring equipment.